|
|
Firebird 2.0
Simple, efficient and fun hot liner High speed performances in a simple model.
 The Firebird offers high performances in flight, speed and efficiency and is capable of performing most aerobatics while its simple 3 servo setup does not requires expensive radio and keep building time at minimum.
It is not a F5 competition machine but is intended to satisfy the needs of all those flying to have fun, offering a very wide flight speed ranges (45 to 230 kmh with an Axi 2826/8, 3S lipo battery and a 13x7 prop).
You will need at least a 300 Watt motor to get the best out of your Firebird, while maximal suggested power is 800 Watt.
The fuselage is big enough to accept most of the brushless motors up to 40mm diameter.
The wing and the elevator are realized in fibreglass with carbon spar and reinforcements; the fuselage is in fibreglass with carbon reinforcement.
The model requires 3micro servos (2 ailerons and one for the elevator).
We strongly suggest the use of a good quality receiver and optocoupled speed controllers for the highest power motors.
Available on request also in full carbon version (this one is slightly heavier and most suited to strong flying conditions; it is also possible to ask for a standard model with carbon-kevlar fuselage.
Wingspan: 1,90 m.
Lenght : 1,28 m.
Wing area: 29,5 dmq.
Profile: RG 15 mod
Empty weight: 1,0 kg.
Flying weight from: 1,6 kg.
Ailerons, V-tail (rudder/elevator) and motor
|
|
